Audi Q7: Assisted parking
General information
Applies to: vehicles with park assist
If your vehicle is equipped with park assist, this
system helps you find suitable parking spaces.
Parking spaces are measured using ultrasonic
sensors on the sides of the vehicle.
The system helps you to park while the driver
monitors the vehicle's surroundings with the
parking aids, cameras", and direct eye contact.
WARNING
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras.
Parking options
Applies to: vehicles with park assist
Fig. 134 Parking options overview
The following parking options may be available
depending on the activation timing:
- After a prior parking space search (1) - (3)
- After trying to park yourself, if you have driven
past a parking space yourself (4). The front of
the vehicle should already be far enough into
the parking space so that the sensors can
measure the space.
Parking options
- Backing into parallel parking spaces
- Backing into perpendicular parking spaces
- Driving forward into perpendicular parking
spaces that you have already driven past
- Driving forward into perpendicular parking
spaces
Options for exiting parking spaces
Applies to: vehicles with assisted parking
Fig. 135 Overview of options for exiting a parking space
Depending on the vehicle equipment, the
following
options for exiting parking spaces may be
available:
- Exiting perpendicular parking spaces
- Exiting parallel parking spaces
READ NEXT:
Applies to: vehicles with assisted parking
Fig. 136 Upper display: activated parking space search
Activating the parking space search
Press
in the lower display. Or
To activate the parking spac
General information
Applies to: vehicles with park assist
Park assist plus parks the vehicle after the parking
space search and also exits the parking space.
While the driver presses and holds the
b
Applies to: vehicles with park assist
plus
You can pause park assist plus at any time by releasing
the button (1), fig. 137.
To resume the process of parking or exiting the
parking space, press and
SEE MORE:
Removing
- Release the hooks in direction of
-arrows- and remove the trim panel forward.
Installing
Install in reverse order of removal.
Installation notes, for example tightening specifications,
replacing components. Refer to
→ Chapter "Overview - Bench Seat/Single Seat, Seat Low Tr
Engine Cover, Removing and Installing
Removing
- Remove the air filter housing. Refer to
→ Chapter "Air Filter Housing, Removing and Installing".
- Free up the vacuum hoses -1 and 3-.
- Carefully pull the engine cover -2-
off of the retaining pins one after the other in direc