Safety Precautions
Safety Precautions when Working on Fuel System
There is a risk of injury due to the fuel being under
pressure.
The fuel system is under pressure. Injuries are possible
from fuel s
Overview - Fuel Tank
Overview - Fuel Tank, Market-Specific North America
1 - Bolt
20 Nm
2 - Fuel Line
To the engine
Do not kink
Clipped to the fuel tank
Connector cou
Removing
- Turn the light switch to position "0".
- Press the tab -3- in using a
flat-head screwdriver and pry out the glove compartment lamp
-2-.
- Disconnect the connector -1-.
Installing
Install in the reverse order of removal while noting the
following:
- Insert the glove
1 - Clamp
Replace after removing
Tensioning. Refer to
→ Chapter "Clamp on Triple Roller Joint and Outer Joint, Tensioning".
2 - CV Boot
If the drive axle has a peened triple roller joint AAR 3300 i, then
the triple roller joint has an adapter installed
Protective
General, Technical data
