Driver Assistance Systems Front Camera, Calibrating
Special tools and workshop equipment
required
Vehicle Diagnostic Tester
Wheel Alignment Computer
Setting Device Basic Set -VAS6430/1-
Adapter VAS6430/9 -VAS6430/9-, only for surface mounted
hoist with a dimension greater than 300 mm.
Proced
Overview - Steering Column, Manual
1 - Bolt
20 Nm +90º
Replace after removing
Clean the threaded hole, for example, using a thread tap, before
installing the new bolt.
Install the bolt first by hand in the first threads. Check if the
steering intermediate shaft is seated correctly