General Information
Before beginning balancing, the following requirements must
be fulfilled.
Tire inflation pressure must be OK.
The tire tread must not be worn down on one side and should
be at least 4 mm deep.
The tire must not have any flat spots.
It is not possible to balance a flat spot
Wire Junction -TV1-, Removing and Installing, Vehicles without
High-Voltage System
Removing
- Disconnect the ground cable from the battery when the
ignition is switched off. Refer to
→ Chapter "Battery, Disconnecting and Connecting".
- Remove the front sill panel. Refer to
→&n
General Information - Telephone
