Audi Q7: Overview - Cover and Cushion, Second Row Seat Pan Low

1 - Seat Frame
2 - Cushion
- Removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Second Row Seat
Pan Low".
- Cover and cushion, separating. Refer to
→ Chapter "Cover and Cushion, Separating, Second Row Seat Pan".
3 - Upholstery Clip
- For securing the cover to the cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers -VAG1634-.
4 - Wire
- Covered in foam padding
- For securing the cover to the cushion
5 - Contour Wire
- Pushed into the cover
- For securing the cover to the cushion
6 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
7 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
8 - Cover
- Removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Second Row Seat
Pan Low".
- Cover and cushion, separating. Refer to
→ Chapter "Cover and Cushion, Separating, Second Row Seat Pan".
- Check that there are no folds after installing
9 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
Overview - Cover and Cushion, Second Row Seat Pan High

1 - Seat Frame
2 - Cushion
- Removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Second Row Seat
Pan High".
- Cover and cushion, separating. Refer to
→ Chapter "Cover and Cushion, Separating, Second Row Seat Pan".
3 - Upholstery Clip
- For securing the cover to the cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers -VAG1634-.
4 - Wire
- Covered in foam padding
- For securing the cover to the cushion
5 - Contour wire
- Pushed into the cover
- For securing the cover to the cushion
6 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Make sure is fits correctly on the seat frame
7 - Cover
- Removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Second Row Seat
Pan High".
- Cover and cushion, separating. Refer to
→ Chapter "Cover and Cushion, Separating, Second Row Seat Pan".
- Check that there are no folds after installing
8 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Make sure is fits correctly on the seat frame
Overview - Cover and Cushion, Third Row Seat Pan

1 - Seat Frame
2 - Cushion
- Covers and cushions, removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Third Row Seat
Pan".
- Cover and Cushion, Separating. Refer to
→ Chapter "Cover and Cushion, Separating, Third Row Seat Pan".
3 - Upholstery Clip
- For securing the cover to the cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers -VAG1634-.
4 - Wire
- Covered in foam padding
- For securing the cover to the cushion
5 - Contour Wire
- Pushed into the cover
- For securing the cover to the cushion
6 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
7 - Cover
- Covers and cushions, removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing, Third Row Seat
Pan".
- Cover and cushion, separating. Refer to
→ Chapter "Cover and Cushion, Separating, Third Row Seat Pan".
- Check that there are no folds after installing
8 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
9 - Molding
- Sewn into cover
- For attaching the cover to the seat frame
- Check for proper seating
READ NEXT:
1 - Molding
Sewn into cover
For attaching the cover to the backrest frame
Check for proper seating
2 - Cover
Removing and installing. Refer to
→ Chapter "Cover and
Cover and Cushion, Removing and Installing, Second Row Seat Pan Low
Removing
- Remove the guide for the lower child seat anchor. Refer to
→ Chapter "Lower Child Seat Anchor Guide, Removing
Cover and Cushion, Separating, Second Row Seat Pan
Note
The removal and installation of the seat high is described.
Special tools and workshop equipment
required
Upholstery Clip Pliers -VAG
SEE MORE:
The type label for refrigerant and filling capacities is
located on the hood.
1 - Refrigerant oil identification (here PAG oil) and additional
information. Refer to
→Fluid Capacity Tables; Rep. Gr.03.
2 - Refrigerant identification, such as R134a
3 - Refriger
1 - Transmission
2 - Hose Clamp
Replacing
3 - Driveshaft
Removing and installing. Refer to
→ Chapter "Driveshaft, Removing and Installing".
Removing and installing on the rear final drive. Refer to
→ Chapter "Drive Shaft, Removing from Rear Final D