Audi Q7: Special Tools
Special tools and workshop equipment
required
- Shock Absorber Set -T10001-

- Tensioning Strap -T10038-

- Tripod Joint Tool -T10065-

- Engine/Gearbox Jack Adapter - Wheel Hub Support -T10149-

- Air Spring Strut Adapter -T10157-

- Hydraulic Press - Bushing Assembly Tool Kit -T10230-

- Socket AF 24 mm -T10361A-

- Ball Joint Removal Tool -T10444-

- Triple Roller Assembly Tool -T40018-

- Puller - Differential Bearing -T40032-


- Triple Roller Assembly Tool -T40236-

- Ball Joint Splitter -T40277-

- Torque Wrench 1331 5-50Nm -VAG1331-

- Torque Wrench 1332 40-200Nm -VAG1332-

- Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7-

- Torque Wrench 1410 -VAG1410-

- Torque Wrench 80-400Nm -VAG1576-

- Clampling Pliers -VAG1682A-

- Spring Compressor Kit -VAG1752-

- Spring Compressor Kit - Spring Retainer w/Inserts
-VAG1752/6-

- Torque Wrench 1783 - 2-10Nm -VAG1783- for vehicles with air
suspension.

- Torque Wrench 1783 - Open Jaw - 10mm -VAG1783/1- for
vehicles with air suspension.


- Air Suspension Strut Charger -VAS6231-

- Engine and Gearbox Jack -VAS6931-


- Press Piece - Rod -VW408A-

- Press Piece - Rod -VW411-

- Press Piece - Multiple Use -VW412-

- Press Piece - 37mm -VW416B-

- Press Piece - Multiple Use -VW447H-

- Bearing Installer - Ball Joint/Bushing/Bearing 2 -VW459/2-

- Press Piece - 42mm -VW516-

- CV Joint Press Sleeve -VW522-




- Bearing Installer - Wheel Bearing -3144-

- Press Piece - Reverse Gear Syncro -3296-

- Subframe Bushing Tool Kit -3301-

- Bearing Installer - Multiple Use -3348-

- Spreader Tool -3424-
- Not illustrated
- Locating Pins -T40327-
- Torque Wrench 1331 Insert - Ring Wrench - 16mm -VAG1331/12-
- Pneumatic Hydraulic Press -VAS6654-
- Splitter VAS251405 -VAS251405-
- Splitter VAS251403 -VAS251403-
- Ball Joint Splitter -VAS251805-
- Puller Set VAS701003 -VAS701003-
- Puller Set - Clamping Sleeve -VAS701003/1-
- Puller Set - Threaded Spindle -VAS701003/2-
- Puller Set - Clamping Handle -VAS701003/4-
- Puller Set - Special Ring Spanner AF36 -VAS701003/5-
- Puller Set - Clamping Pliers, Diameter 66-70 mm
-VAS701003/7-

READ NEXT:
Caution
There is a risk of damaging the threads on the subframe
threaded connection to the body.
The subframe bolts on the body must not be loosened or
tightened with an impact wrench.
A
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Torque Wrench 1332 40-200Nm -VAG1332-
Engine and Gearbox Jack -VAS6931-
Gearbox Support -T40173-
Locating Pins
SEE MORE:
Component Location Overview - Components Outside of Passenger
Compartment, Front Component Group "1"
Components on the vehicle front and in the engine
compartment
Note
Depending on vehicle equipment, there are different versions
of the A/C system for the Audi Q7. Make sure to use the corr
Heater Core, Preparing for Removal
- Turn on the ignition.
- Adjust the airflow direction of the air on the Front A/C
Display Control Head -E87- to "DEF" (to the windshield).
- Set the temperature preset on the Front A/C Display Control
Head -E87- for the left and right side to "col